What is a ballast?

Call Us Today!

You can ask any company to provide evidence of basic liability contractor insurance. Any company that is not going to supply proof of basic liability (GL) insurance must be avoided. A minimum basic for GL insurance coverage is $1 million for property work and $2 million for light business.

There are other methods for researching air conditioning, heating and ventilation business such as: contact your local Better Business Bereau (BBB), carry out online searches and reviews and ask the company in question for referrals. Nevertheless, all of these approaches fall brief of comprehensive openness. The BBB in fact works for the business it represents as they are just ranked if the business in question pays them a recurring fee. Online evaluation sites seldom show all the reviews received, and post reviews from sources that are not constantly credible. This supplies a platform for companies to publish their own reviews and people to quickly publish evaluations without the company in question's ability to professionally solve the issue. Furthermore, no business would offer a negative recommendation; only those that are incredibly favorable. None of these are perfect dynamics for consumers seeking completely impartial evaluations and referrals. It is advised to utilize these methods as an informed consumer and consider the information source for exactly what it deserves.

Among the best ways to discover a brand-new cooling, heating and ventilation professional is through the "word-of-mouth" method. If the company recommended was budget friendly, expert and reputable for a buddy or family member, there is an excellent opportunity that company will do the same for you. Good business use the word-of-mouth technique to continuously provide a new consumer stream by keeping their clients delighted.

Other conventional methods for finding a brand-new a/c, heating and ventilation professional consist of performing online searches, phonebook directory sites or online directory sites and other advertisement mediums. Remember that of these techniques are bought and spent for by the companies in question. None of these techniques ought to act as a testimonial and must be utilized just as finding sources.

3rd party providers such as Angie's list, Discover Regional and other online companies are the latest platforms for sourcing and rating a/c, heating and aerating business. Although these companies do supply a service with some merit, they are, in truth, including expense to the consumer. Angie's List, as well as some other online business directory sites, charge the consumer straight for their scores and companies' contact information. Other third-party websites offer consumers with a/c, heating and ventilation companies and add the expense of being a middle-man to the business equation. Remember that none of these are "free" which consumers should comprehend the cost and value of using entities like these.

Numerous estimates are advise when employing an a/c and heating contractor. There are no market requirements for prices A/C associated product or service. Similar tasks can differ countless dollars from one company to the next. A minimum of 3 estimates is recommended prior to the repair work or replacement of any significant cooling and or heater element and before the style and setup of new systems.

A second opinion can be of value if the repair work or replacement is expensive. Not all specialists or companies are equivalent or credible. Fixing cooling and heating systems is extremely complicated. It is not uncommon for a repair work specialist to be not able to isolate the issue or for an agent to suggest an unnecessary purchases. Contacting a contending cooling and heating company can conserve money and time and regret.

What is a ballast?

Frequently Asked Questions:

Explain The Brayton Cycle For Gas Turbine And Piston Engine..!!?
This Is My H.W Plz Help

Brayton cycle theory for Gas Turbine Engine: The two major application areas of gas-turbine engines are aircraft propulsion and electric power generation. This section introduces the ideal cycle for gas-turbine engine - Brayton cycle and jet-propulsion cycle for aircraft propulsion. n response to this situation, power generation engineers will be in high demand. These engineers must have a thorough understanding of thermodynamics and, in particular, the Brayton cycle.


The components of a Brayton cycle device for jet we will typically represent these components schematically. In practice, real Brayton cycles take one of two forms. An ``open'' cycle, where the working fluid enters and then exits the device. This is the way a jet propulsion cycle works. The alternative, a closed cycle, which recalculates the working fluid. Closed cycles are used, for example, in space power generation.




Gas turbines usually operate on an open cycle; Fresh air at ambient conditions is drawn into the compressor, where its temperature and pressure are raised. The high-pressure air proceeds into the combustion chamber, where the fuel is burned at constant pressure. The resulting high-temperature gases then enter the turbine, where they expand to the atmospheric pressure through a row of nozzle vanes. This expansion causes the turbine blade to spin, which then turns a shaft inside a magnetic coil. When the shaft is rotating inside the magnetic coil, electrical current is produced. The exhaust gases leaving the turbine in the open cycle are not re-circulated.

Brayton cycle theory for Piston Engine: George Brayton was an engineer that designed the first continuous ignition combustion engine which was a two-stroke engine that was sold under the name "Brayton's Ready Motors." The design employed the thermodynamic processes that is now considered "The Brayton Cycle" (but is also coined The Joule Cycle). The gas turbine was patented in 1872. The design was a engine connected to a reservoir of pressurized atmospheric air and gas which would only turn on if a valve was turned. This would release the pressurized gas to a combustion vessel, which would turn pistons to create mechanical work and re-compress the gas in the reservoir.



George Brayton's gas turbine was the first and most prominent fully operational gas turbine that implemented the Brayton Cycle. Gas is pressurized and held in reservoir A, where a valve would release it to move through tunnel B and be ignited in chamber C. This is an isobaric process due to the fact any increase in pressure would just push the gas out of the engine. When work is done on the D piston, mechanical work can be employed for a variety of things, such as generation of electricity or movement, and there is also a piston in compartment E that sucks in atmospheric air from valve F. Valve G is a fitting to a fuel cell where the fuel to air ratio can be set so that a desired ratio for maximum efficiency is kept. The gas is then mechanically compressed back into reservoir A through an adiabatic process due to the piston E.

Which Central Air Condition Unit/Brand Is Better? Lennox, Trane, Or Carrier?

Whichever offers the best warranty.

My Air Conditioning Unit Which Is About 12 Years Old Has A Freon Leak. Fix Or Replace?
Apparently My Outside Unit (American Standard) Has Aluminum Coils Which Have A Leak And Are Hard To Repair. Is It Worth Trying To Fix Or Should I Replace The Entire System?

I serviced and sold American Standard for years. I have taken technical Class on how to braze their aluminum tube "spine-fin" coils. Unless the person doing the work is a "cracker-jack" Master Technician like me, who knows how to weld those coils and who knows what type of flux and what type of aluminum brazing rod to use, you are going to be wasting your time and hard earned money. I no longer sell American Standard or Trane. I am partial to copper tube coils, which only a few manufactures use anymore. The copper tubing is more expensive but it is also more durable and harder to kink or puncture too. If you were to get a hole or any kind of leak in a copper tube coil, it can easily be brazed by any knowledgeable technician with no special welding rods or special flux. I highly recommend replacing the outdoor condensing unit, the indoor evaporator coil and the entire refrigeration line-set and stepping up to a higher efficiency system that uses the new #R-410a refrigerant and runs at at least a 16.00 SEER efficiency.

Please check my site http://www.nlbheating.com/ there is much information to be found here. If you live in the Chicago-land area, I will be happy to give you a FREE Estimate on an upgrade.

What Are Good Conditions For Dust Devils?
I Love Dust Devils- Theyre Like Little Mini Tornadoes! My Mom Saw A Water Devil On The Pond Once! Big One Too! What Are Good Conditions? Also, Wen Its Real Windy, Our School Building Is In An L Shape, And I Can Sit One A Windy Day Looking Inside The &Quot;L&Quot;And Watch Theese Mini Dust Devils, Mostly An Inch High But 1 Foot Acoss, And Not Very Storng Theyre Cool But Not Amazing. I Wanna No Y They Happen And If Theesee Are The Same As Dust Devils Also, Where Can You Find A Dust Devil; What Are Good Conditios For Them?

The best conditions are very warm to hat air at the surface combined with light winds. Slight irregularities in those winds can cause local spinups which if they pick up some dust and such we see as dust devils.

What you are describing is eddys of air caused by winds blowing around obstacles. They can act just like dust devils but are generated by an entirely different process.

Is It Okay To Let Mini-Dachshund Sleep In An Air-Conditioned Room?
He'S Only 2Months Old. If He Can'T Sleep In An Air-Conditioned Room Now, Will He In The Future?

If you mean sleep inside a house - yes it's ok? Dachshunds love to burrow in their sleep under blankets, towels, pillows, etc so having a cool environment which he can snuggle in could actually be a good thing.

Call Us Today!

888-776-3246 Margate Emergency AC Company Margate
Air Conditioning Services Spring TX - Prestige Air Conditioning Services (281) 288-6211
Touch to Call!