Call Us Today!
During summer season, the most dreadful of things you can experience is the ruthless scorching heat. The high temperature levels just won't go down but rather appear to go up night and day. You lay awake during the night trying to find out where you can get a cooling service that works on weekends, however the temperature levels are expensive for you to concentrate. This post talks about the value of working with professional Air Conditioning repair work experts when your a/c system breakdowns.
The majority of people select professional a/c services when they want to set up a new Air Conditioner in their houses or workplaces. Though A/C specialists primarily use setup services this is not service that they use. A couple of other services provided by such service technicians in addition to Air Conditioning installation are repair work, replacement and A/C upkeep services. Since air conditioning systems cost a considerable quantity of money to acquire it is normally suggested that resident with malfunction systems decide to fix rather than change their units when they start malfunctioning. Routine maintenance of house a/c units keeps them from malfunctioning frequently and increases their toughness.
Air Conditioning Service:
One benefit of opting for a professional air conditioning professional is that such individuals, companies or services providers offer their client a/c maintenance services which are rather essential for the correct working these devices. In order for an Air Conditioner to run both successfully and efficiently regular cleaning and maintenance or servicing is needed. A/c systems that are not effectively preserved lose their durability and tend to malfunction rather frequently which naturally causes additional financial burdens on homeowners due to the constant repair work they require. In order to avoid the financial burden of needing to pay for Air Conditioning replacement services it generally suggested by market professionals that you schedule your a/c system for upkeep every 8 months to 12 months.
Access to knowledge:
Another advantage of opting for an expert when it concerns Air Conditioning repair is that of the know-how they provide. A lot of air condition systems set up in homes typically cost a considerable quantity of money. As such when these essential house gadgets malfunction it is very important to obtain somebody who is knowledgeable and has the necessary proficiency requirement to make the essential repair works. Trying to take on such a job individually as a DIY job may regrettably in more cases than not result in more damage than good; sometimes needing an AC owner to spend a lot more in replacing the home appliance rather than fixing it. By opting for expert Air Conditioning repair service you are able to limit the amount of cash invested in correcting the malfunction given that such professionals are well placed to determine and correct the precise problem.
How to make a Powerful Rechargeable LED Emergency Light at home DIY Homemade LED Light / Lamp
Frequently Asked Questions:
I Live In Texas. What Size Air Condition Unit Do I Need For A Home That Is Approximately 1500 Square Feet?
Carolath got it right, but I would not go less than 3 ton unit, 36000 BTU, anything less, will run all the time on hot days. I think manufacture over rate the cooling capacity of some units. Shop around and get high EER rating it will save you money.
Where Is The Filter On My Air Conditioning Unit?
I'M Having Trouble Locating The Filter Area On My Unit- I Do Not Have A Manual And The Model Is Not Located On The Manufacturer'S Website.
The Model Is 58Gsc.
If Anyone Could Help That Would Be Great- I'M In California And It'S 88 Degrees In My House- At 1030 At Night!
Okay, To best help you is by telling you like this. cause you don't seem to know too much about air conditioning units. Without looking at your books. Lets use some common sense. OKAY. What does the filter do? The filter's job, is to filter the air before it enters the ac unit to keep the coils clean, and provide clean air. OKAY. BINGO! look at your ac unit. Figure out the intake of air register (air goes inside your unit) Then, look for the filter. If is a window unit you have. It is made out of plastic, pull the cover out, take the filter out and then washe it. If is an air conditioning unit that supplies air to the whole house. you need to go to the unit where you hear the motor blowing the air, and turn the power off to the unit, then open the panel and the filter should be right there!. On split systems you normally find the blower inside your attic. If is a stand up a/c unit inside of closet or not inside of closet it will be the behind the front panel. If you have a single package unit, meaning not a split system, then, you need to find the blower section, open the panel and should be there. EUREKA!. I FOUND IT! Good job you get a B-.
Need Help Identifying Ac Blower Motor Wires In Home Air Conditioning?
So, My Old Blower Motor Started Smoking, And Sparking, I Took It In, And Bought A New One, The Guy Also Sold Me A New Capacator With It, And Hooked It Up For Me... But I'M Confused Which Wires Go Where. I Took Pictures... Http://Picasaweb.Google.Com/Damien59/Edsairconditioner?Feat=Directlink
The Old Motor (Both Are 240V) Had 3 Wires Connected, 2 Going To The Capacator, And 1 Going To A Black Relay Box I Believe. The New Motor Has 2 Seperate Wires Just For The Capacator.. And Then Also A Black And White One.. (Not Using Blue Or Red Which Are Low And Med Speed)
Any Help Would Be Appreciated.
Is the orange wire on the capacitor in your picture attached to the top of the contactor? It is hard to tell.
If it is, then on the new motor, the 2 separate wires that go to the capacitor (probably both brown), go to the capacitor, the black wire on the new motor goes to the same place where the original black wire went on the relay, and the white wire goes to the terminal where that orange wire comes off of the contactor.
I hope this makes sense. A lot of older motors were 3 wire.
Why Do High Rise Buildings Need Air Conditioning?
Though fresh air is an important concern, perhaps the main concern is that heat rises. In a high rise the accumulated heat in the upper stories could become unbearable for those who have to live or work there.
Moisture Coming Out Of Window Air Conditioning Unit Vents?
We Have A Window Air Conditioning Unit In One Of Our Windows. It Is Mounted Tilting Downward, Which Is Supposed To Ensure That The Moisture Produced By The Cooling Process Flows Out The Back Of The Unit. However, Since We Got This Unit About A Year And A Half Ago (It'S Out Of Warranty), And It'S Doing It Again Now That We'Ve Turned It On For A Few Hours, The Moisture Just Pours Out Of The Vents.
When You Look Inside The Vents From The Inside, You See A Styrofoam Area With An Opening In The Middle Where You Can See The Fan In The Air Conditioning Unit. Looking At The Unit From The Back, From Outside, The Styrofoam Part Is Closed Off From The Working Parts Of The Air Conditioning Unit And The Back Grille.
When The Unit Is Operating, You Can Sit There And See An Enormous Amount Of Water Pool Up Inside The Grilles Around The Styrofoam Area, I Mean An Enormous Amount. It Doesn'T Appear To Have Any Outlet To Run Back To The Back Of The Unit, It Certainly Doesn'T Appear To Be Running Down Into The Opening To The Fan Area. It Just Pools Up And Blows Out The Vent Grilles.
We Have Tried Everything And It'S Impossible To Mount This Unit Tilted Any More Downward, But It Continues To Blow Water Out Of The Grille To Where We Have To Keep Towels On The Floor In Front Of It. I'Ve Even Thought Of Punching Holes In The Styrofoam To See If That Might Help The Water Stop Pooling Up In The Area Around The Vents.
Does Anyone Know What Might Be Going On Here, Or Have Any Suggestions For What We Might Could Do To Fix This. It'S A Great Air Conditioning Unit As Far As Cooling The Small Area We Use It For, But We'Re Getting Tired Of Having To Clean Up Water From It.
It sounds like a drain problem, although not the drain in the back as others have mentioned. (Also, I'm not sure how freezing up would make it expel that much water...)
There should be a place in the styrofoam where the water can drain to the back of the unit--this is most likely plugged. The easiest way to find and unplug the drain is to remove the cover from the unit (remove a few screws on the sides and top, and the whole outer case (sides and top) should lift off). Find the hole where the water is supposed to drain and unplug it, you shouldn't' have to drill another hole. While you have the cover off, clean it well and make sure none of the fins (front and back) are bent: if they are, you can straighten them with a fin comb (or if it's just a few, with a credit card).
Also check to make sure that a rear drain, if present, is not plugged. Many modern window air conditioners do not have a rear drain at all--the fan is low enough that once some water collects in the bottom, it will hit the fan and splatter on the condenser coils (cooling them, and evaporating).