Call Us Today!
Throughout summertime, the most awful of things you can experience is the ruthless scorching heat. The heats simply will not decrease however rather seem to go up night and day. You lay awake at night aiming to find out where you can get an air conditioning service that deals with weekends, but the temperature levels are expensive for you to focus. This short article talks about the importance of working with professional AC repair work experts when your air conditioning system breakdowns.
Many people select expert a/c services when they want to set up a new Air Conditioning in their office or homes. Though A/C experts mostly offer installation services this is not service that they provide. A couple of other services provided by such specialists in addition to Air Conditioner installation are repair work, replacement and Air Conditioner upkeep services. Because cooling systems cost a considerable amount of cash to buy it is typically advised that homeowner with breakdown systems decide to repair instead of change their units when they start malfunctioning. Routine upkeep of house air conditioning systems keeps them from malfunctioning often and increases their sturdiness.
Air Conditioning Service:
One benefit of deciding for a professional cooling professional is that such individuals, business or services service providers use their customer air conditioning maintenance services which are rather essential for the correct operating these devices. In order for an AC to run both effectively and effectively routine cleansing and upkeep or maintenance is needed. A/c systems that are not effectively maintained lose their toughness and have a tendency to malfunction on a regular basis which naturally causes extra monetary concerns on property owners due to the constant repair they need. In order to avoid the financial concern of needing to pay for Air Conditioner replacement services it usually suggested by market professionals that you schedule your cooling system for maintenance every 8 months to 12 months.
Access to expertise:
Another benefit of choosing a professional when it comes to Air Conditioning repair is that of the know-how they offer. Many air condition systems set up in homes typically cost a considerable amount of money. As such when these vital house devices malfunction it is necessary to get someone who is skilled and has the required knowledge have to make the essential repair works. Trying to take on such a job separately as a DIY project may unfortunately in more cases than not cause more damage than great; often requiring an A/C owner to spend a lot more in changing the appliance rather than repairing it. By going with professional AC repair service you have the ability to restrict the amount of money spent in correcting the malfunction given that such specialists are well positioned to determine and correct the precise issue.
Douglasville, Ga Heating and Air Conditioning Repair Contractors – Ragsdales – Douglasville, Ga
Frequently Asked Questions:
How To Convert 1 Ton To 1 Kw?
How To Convert Ton To Kw
Unit of refrigeration
Domestic and commercial refrigerators may be rated in kJ/s, or Btu/h of cooling. Commercial refrigerators in the US are mostly rated in tons of refrigeration, but elsewhere in kW. One ton of refrigeration capacity can freeze one short ton of water at 0 °C (32 °F) in 24 hours. Based on that:
Latent heat of ice (i.e., heat of fusion) = 333.55 kJ/kg ≈ 144 Btu/lb
One short ton = 2000 lb
Heat extracted = (2000)(144)/24 hr = 288000 Btu/24 hr = 12000 Btu/hr = 200 Btu/min
1 ton refrigeration = 200 Btu/min = 3.517 kJ/s = 3.517 kW
A much less common definition is: 1 tonne of refrigeration is the rate of heat removal required to freeze a metric ton (i.e., 1000 kg) of water at 0 °C in 24 hours. Based on the heat of fusion being 333.55 kJ/kg, 1 tonne of refrigeration = 13,898 kJ/h = 3.861 kW. As can be seen, 1 tonne of refrigeration is 10% larger than 1 ton of refrigeration.
Most residential air conditioning units range in capacity from about 1 to 5 tons of refrigeration. So ballpark about 3.5 kw or 12000btu per hour
Why The Air Condition Take Ice In The Winter?
When The Ice Tends To Insulate The Coil From The Air Why The Heating Is Decrease And What Hapen Inside The Coiles And Compressor Please Gave More Information ?
Actually you are describing a heat-pump. It has two modes of operation, cooling and heating. The cycle is reversed during the cooling mode.
During the heating mode, the heat pump takes energy from the outside air and warms the coil inside the house.
The outside coil needs to be cooler than the outside air in order for the heat pump to work
During the winter the outside air can be below freezing, and the heat pump will continue to drive the coil temperature down to try and get heat from it. (most shut down and go to emergency heat around 38 degrees F)
If the air is 40 degrees the heat pump coil is likely 25-30 degrees and that is below freezing, the small amount of humidity in the air freezes to the coil and begins to block the heat transfer area and reduces the heating ability.
The heat pump should sense this problem and go into a defrost cycle to clear the ice.
If this doesn't happen there could be a problem with the unit.
I Want To Know How Many Tons An Air Condition Split Unit With 4.8Kw How Can We Change Kw To Tons Of Air?
How Can We Change Kw To Tons Of Air For Air Conditions
1 ton is 12000 btu/hr of heat removed, or 3.516 kw. So 4.8 kw would be about 1.36 tons of ac.
I Am Researching About Goe-Thermal Heating.?
Now I Understand The Basics Of Residential Heating & Cooling, So When You Compress A Refrigerant Such As R22, You Slow Down The Moulacules From Moving. Now That Will Lowere The Temp. Of The Refrigerant. But In Geo-Thermal Heating, When Heat Energy Is Extracted Form The Ground By The Way Of A Closed Loop System. It Is Then Put Under Pressure Via. A Compressor, How Does It Create Heat? Would You Not Be Doing The Same A Condensor/ Compressor Unit Of A Air Conditioning Unit? Thank'S In Advance For Any Answers!
A geothermal unit works off of the same principle as as conventional heat pump. The main difference is that the Geo unit is self contained inside the house and it uses a constant ground temperature of around 60 degrees to extract the heat from versus 0 degree or 45 degree outside air temperatures. In the summer you dissipate the heat back into the ground which is also easier than getting rid of it to 95 degree outdoor air temperature. The water and ground act as your condenser would on a conventional system but does it much more efficiently. You can also heat approximately 40% of your hot water with one of these. Check out www.geoexchange.com and that will answer alot of your questions. Good brands are Water Furnace and ClimateMaster.
What Are The Top 5 Ranking Air Conditioners?
Need Information For Highly Recommended Residential Air Conditions With Heat Pump.
American Standard (who also makes Trane brand)
That's where i'll stop.
At the bottom end, there are Nordyne that makes about a dozen contractor grade brand names, and Goodman who also makes about a dozen at the lower end of the scale.
Be sure to get a good contractor to install it for you, as installation is just as important as selecting a good units.
Also, larger is NOT better. To right-size the unit, the contractor will have to do what is called a "heat-load calculation" or other wise known as Mode-J calculations. Here, the contractor will measure your room size, orientation, widow size, size of the duct, etc, and arrive at the right size unit.
To small, it won't effectively cool or heat the rooms. To large, it will cycle so fast, it will never reach the long run time that is required to reach the maximum effeciency and de-humidification.