Call Us Today!
You can ask any company to provide proof of basic liability contractor insurance. Any business that is not willing to offer evidence of basic liability (GL) insurance need to be avoided. A minimum standard for GL insurance is $1 million for domestic work and $2 million for light industrial.
There are other approaches for looking into cooling, heating and ventilation companies such as: contact your regional Better Business Bereau (BBB), perform online searches and evaluations and ask the business in question for recommendations. Nevertheless, all these techniques disappoint thorough transparency. The BBB really works for the companies it represents as they are just ranked if the business in question pays them a repeating charge. Online evaluation websites rarely show all of the evaluations got, and post reviews from sources that are not always trustworthy. This provides a platform for business to post their own evaluations and people to hastily publish evaluations without the company in question's capability to professionally fix the issue. Additionally, no company would offer a negative referral; only those that are incredibly favorable. None of these are ideal characteristics for consumers looking for totally unbiased evaluations and recommendations. It is recommended to use these approaches as an informed consumer and think about the information source for what it deserves.
One of the very best ways to discover a new air conditioning, heating and ventilation professional is through the "word-of-mouth" method. If the company recommended was budget-friendly, expert and dependable for a pal or relative, there is a great chance that company will do the very same for you. Great business use the word-of-mouth technique to continually provide a brand-new customer stream by keeping their clients delighted.
Other conventional techniques for discovering a brand-new cooling, heating and ventilation specialist consist of performing online searches, phone book directories or online directories and other advertisement mediums. Keep in mind that all of these methods are purchased and spent for by the business in concern. None of these methods need to act as a testimonial and ought to be utilized only as locating sources.
3rd party suppliers such as Angie's list, Find Regional and other online business are the most recent platforms for sourcing and ranking cooling, heating and ventilating companies. Although these companies do provide a service with some benefit, they are, in fact, including cost to the consumer. Angie's List, along with some other online organisation directory sites, charge the consumer directly for their ratings and companies' contact info. Other third-party sites offer customers with air conditioning, heating and ventilation business and include the cost of being a middle-man to the business equation. Remember that none of these are "complimentary" which consumers need to understand the expense and value of using entities like these.
Numerous estimates are advise when employing a cooling and heating contractor. There are no market standards for rates HEATING AND COOLING related service or products. Comparable jobs can differ countless dollars from one business to the next. A minimum of three quotes is suggested prior to the repair work or replacement of any significant cooling and or heating system component and before the style and setup of new systems.
A second opinion can be of worth if the repair work or replacement is expensive. Not all professionals or business are equal or credible. Fixing a/c and heating systems is very intricate. It is not uncommon for a repair work professional to be not able to separate the problem or for a representative to suggest an unneeded purchases. Contacting a competing air conditioning and heating company can conserve time and money and regret.
Comfort Services Heating and Air Conditioning Inc Garner
5 Star …
Frequently Asked Questions:
How Much More Expensive Is Central Air Conditioning To Operate Than Individual Wall Units In A Home?
It depends upon the efficiency of each individual unit & how much you run them. If each individual unit has the same efficiency as the central A\C unit, running them all at once would use the same amount of energy as running the central A\C unit. If you only run a few of the individual units, it would use less energy than a central A\C unit would. If each individual unit is less efficient than the central A\C unit, running each individual unit at the same time would use MORE energy than it would take to use a central A\C unit. If each individual unit was more efficient than the central A\C unit, running each individual unit at the same time would use less energy than the central A\C unit.
What Type Of Central Air Conditioning Can I Install Without A Furnace Or Baseboard Heat?
I Have A Small New 1000 Foot Home With Wall Heating. So No Furnace And No Baseboard Heat. We Have A Small Attic Space And A Crawlspace. Is There A Way To Install Central Air And If So What Kind Would I Be Looking At?
place air handler in the attic...and condensor unit out side........the run duct work in the attic to all the rooms..penetrate these rooms thru the ceiling.........add i large return vent with filter in the center hall ceiling thats a conventional wall............ if attic doesnt go over all rooms check out a Unico system
Problems With Central Air Conditioning?
We Have Been Having Leaks From Our Air Conditioning Unit During The Summer Months. We Have Had Many Service People Out To Look At It. They All Tell Me That My Two Separate Drains Are Clogged, And Therefore The Water Runs Over The Pan And We Get A Leak. They Unclog The Drains And Everything Seems Fine For A While. Then The Problem Starts Again. Sometimes It Will Be Months, And Sometimes It Will Be Weeks Before The Problem Comes Back. Is There Anything That We Can Do To Help This Situation? We Have Yet To Repair Ceiling Because Of This Nuisance Leak. I'M Sorry If I Have Left Out Any Information That May Help To Answer This Question. Any Advice Is Appreciated. Thank You.
I had this problem in my home. Here is how the system works.
1. When warm air from your return system meets the cold heat exchanger the air is cooled AND excess moisture condenses from the air.
2. The condensed water runs to the bottom of the heat exchanger (HX) unit where it is collected and directed to drain #1. If you have an attic system drain #1 is the lower drain on the outside wall.
3. The proper operation of this drain #1 depends on three things, no leaks in the Heat exchanger floor AND no clogs in the drain #1 And heat exchanger unit being slightly slanted toward drain #1. In my case the heat exchanger floor was cracked and leaked AND the heat exchanger was sloped wrong so the water flowed the wrong way anyway.
4. If one of the problems in 3. exists (HX floor leak or wrong slope) the water will drip into the pan under the HX. This pan is for emergency's only and has its own drain---drain#2 which is the upper drain in an attic installation. So if the HX leaks, is sloped wrong or drain #1 is clogged the water does go to the emergency pan. If the emergency has rusted out and leaks or it it is sloped wrong or if its drain is clogged the water spills onto your ceiling.
So what do you do about this yourself instead of calling expensive tech who are not fixing the problem???
First---put a level on the HX unit and make sure it is sloped toward the drain... You have to check both along and across the HX unit to make sure the slope is toward drain #1. Do the same with the emergency pan.
Second--if the slope's are right check the pvc drains. Normally there is a hole left in the PVC pipe to blow out the drains. If not just cut the pvc and install your own hole. Block the upstream passage and blow air from your lungs downstream If blocked you will notice right away. Do the same for upstream. Same thing for the emergency drain PVC. If you find either blocked you need to identify the source of the blockage---it might be insulation coming loose from inside the HX.
Third---this is what I had to do---I cut a hole in the HX box on the top so I could look inside. The material is mostly stiff insulation so it cuts easily. The HX inside is metal so cut carefully. Use the metalized tape to put it back together. I looked inside my HX box and found the floor cracked AND the pvc drain connection broken AND the slope was wrong. I sprayed the floor with rubber sealant, fixed the broken pvc connection and fixed the slope and solved 90% of the problem. My emergency pan was rusted out and the slope wrong on it also. I fixed the pan and the slope and solved 90% of that problem also. But, I will soon need a new system as mine is 18 years old. I have never had an issue with clogged PVC drains. I would bet your problem is one of these other problems.
Can I Couple My Electric Air Conditioner With Solar Panel Without Using A Inverter?
Energy from a solar panel is direct current (DC), typically 12 to 48 volts. Conversely, most air conditioning equipment uses alternating current (AC). I suppose you could find air conditioning equipment that runs on DC. Hunt around! They are made specifically for trucks and other vehicles. You'll need to analyze whether you want to buy all new air-conditioning equipment, or just go ahead and get an inverter.
Lets Pretend Man Is Causing Global Warming. How Would We Stop It Without Wrecking The Worlds Economy?
And How Will We Know If Our Efforts Paid Off Or If The Climate Just Changed On Its Own?
We all need to ride bicycles made from our own excrement, and ban showers and air conditioning , only then can we save our Mother Earth , man.