Call Us Today!
You can ask any business to offer evidence of general liability professional insurance. Any company that is not willing to offer evidence of basic liability (GL) insurance coverage must be avoided. A minimum basic for GL insurance coverage is $1 million for property work and $2 million for light commercial.
There are other approaches for researching a/c, heating and ventilation companies such as: contact your regional Better Business Bereau (BBB), perform online searches and reviews and ask the business in question for recommendations. However, all of these approaches fall short of comprehensive openness. The BBB in fact works for the business it represents as they are just rated if the business in concern pays them a recurring charge. Online review websites seldom show all of the reviews got, and post reviews from sources that are not constantly reputable. This offers a platform for business to publish their own evaluations and individuals to quickly post evaluations without the business in concern's ability to professionally deal with the problem. In addition, no business would provide a negative reference; just those that are extremely positive. None of these are ideal characteristics for consumers looking for completely impartial evaluations and referrals. It is encouraged to utilize these approaches as an informed customer and think about the details source for what it is worth.
Among the very best methods to find a brand-new cooling, heating and ventilation specialist is through the "word-of-mouth" technique. If the business advised was budget friendly, professional and dependable for a buddy or household member, there is a likelihood that company will do the exact same for you. Excellent companies utilize the word-of-mouth approach to constantly offer a new client stream by keeping their customers pleased.
Other standard techniques for finding a brand-new a/c, heating and ventilation specialist consist of performing online searches, telephone directory directories or online directories and other ad mediums. Bear in mind that all of these approaches are bought and spent for by the business in question. None of these methods must function as a testimonial and needs to be utilized just as locating sources.
3rd celebration providers such as Angie's list, Find Regional and other online companies are the newest platforms for sourcing and ranking air conditioning, heating and ventilating companies. Although these business do provide a service with some benefit, they are, in reality, including cost to the consumer. Angie's List, along with some other online organisation directory sites, charge the customer straight for their rankings and companies' contact info. Other third-party websites supply customers with air conditioning, heating and ventilation companies and add the expense of being a middle-man to the company formula. Remember that none of these are "totally free" and that consumers need to understand the cost and worth of utilizing entities like these.
Numerous estimates are advise when employing a cooling and heating professional. There are no industry standards for rates HEATING AND COOLING related service or items. Comparable tasks can differ countless dollars from one company to the next. A minimum of three quotes is advised prior to the repair or replacement of any significant air conditioning and or heater element and before the design and installation of brand-new systems.
A second viewpoint can be of worth if the repair or replacement is costly. Not all specialists or companies are equivalent or credible. Fixing air conditioning and heater is extremely complex. It is not uncommon for a repair specialist to be unable to separate the problem or for a representative to suggest an unneeded purchases. Calling a competing cooling and heating business can save money and time and regret.
Blue Star on CNBC’s ‘Making It Big’ Part 2
Frequently Asked Questions:
Which Is A Better Heater/Air Conditioner Brand? Trane Or Lennox?
I Want To Know Which Company Offers A Better Quality Of Heat And Air Conditioning System Thanks .
Both are good brands, Lennox replacement parts are very expensive. Remember the higher the efficiency of the indoor furnace and the high SEER outdoor equipment means the replacement components that go into them are very expensive. New ECM motors found on 96%-97% efficient gas furnaces can run between $800-$1,000 installed. I personally like Rheem; units are affordable, reliable, and replacement parts are cheap...
Does Anyone Know A Really Good Air Conditioner Brand..?
I Bought A Danby Air Conditioner The Other Day.. Ithought It Would Be Good. It Does Coool Off The Rooom But Not As Good As I Thought It Would For The Price.. Any Suggestions, With Prices
forget brand names,one doesn't do better or last longer than another,but you need capacity ,if you have a small room with little or no sunlight ,then 8000 ought to be too much,but if you leave the door open,try to cool the whole house,you will need a bigger one..........tom
I Would To Get Air Condition For My Home?
A Window Unit Will Work
ok thx for the advice
but seriously, yes a window unit CAN work.. if you get a big enough air conditioner... @ least 12000 BTU's
Please Explain Energy Saving Mode On My Air Conditioner (Window Unit)?
We Just Bought A Small Window Unit For Our Bedroom And I Do Not Understand The Energy Saving Mode. For Instance, If It Set It At 77 Degrees It Will Run Until It Is Apprx 75, Then The Fan Will Run For A Few Minutes And It Will Shut Off. The Temperature On The Ac Then Continues To Show That It Is Dropping Although It Is Not 72 Degrees In The Room. It Stays There For A Long Period Of Time Before Turning Back On. However, If I Shut It Off Completely And Then Turn It Back On It Will Show That It Is 77- 78 Degrees And Start The Process All Over Again. Please Explain This To Me. The Ac Is Brand New.... How Does Energy Saver Mode Work?
I'm not an expert of air conditioning systems so there might be a better explanation (maybe from the manufacturer). But in my experience, some functions of house hold appliances are not perfect and are often a bit of a sales gimmick.
From your description, it sounds like the manufacturer have tried to program the unit so that it overshoots the desired temperature (goes to 75deg instead of 77deg) then turns off, monitors the room temperature until it reaches a warmer temperature and turns back on again, instead of constantly running the fans to keep the room at 77deg.
It is equivalent to driving your car by putting your foot down, accelerating to 80km/h, then letting off the gas and free-wheeling until you have slowed to 50km/h, then accelerate again! (It might save you on fuel... just don't drive in front of me! 🙂 )
Turning the unit off and back on resets the electronics that reads the thermostat device and compares the reading (which is just a voltage) with a calibrated value and displays the correct temperature again. After the initial calibration, the electronics may not make this comparison again and the unit relies solely on the change in voltage from the thermo-sensor.
Talk to the manufacturer. Maybe they can advise you on whether it is incorrectly installed, faulty or just a 'feature' of the particular model of air-conditioner. Maybe an external thermo-sensor is available too? One that mounts on the wall away from the internal workings of the unit.
Competitive Analysis Of Split System Home Air Conditioners?
Any Literature Out There (From An Unbiased, Independent Source) That Compares/Rates &Quot;Like&Quot; Competing Ac Systems (Tons, Seer, Component Materials, Warranty, Price) From Trane, Ruud, Carrier, Amana, Westinghouse, American Standard, Etc.
Every Ac Company Tends To Promote The Unit That They Have Agreements (Or Biggest Profit Margin) With And Always Play Down The Other Competitive Units. Likewise, Pricing In The Industry Is Strenously Controlled And Not Available To Consumers (Even Retail Pricing) Unless You Get A Quote, Making It Extremely Difficult To Do Your Research.
I spent ten years in the biz, and I had an outstanding sales record because I did not marry myself to a particular product and their marketing spin. Instead, I advised my clients to purchase the highest efficiancy equipment available, get a ten year all parts and LABOR extended warrantee, contract with an excellent installation company, and negotiate a great price.
A good installation is going to include new refrigerant lines, rustproofing, sealing, replacing or modifying ducts for optimum performance, high-efficiancy filtration, germicidal lamp for the evaporator coil, and proper sizing based on heat load calculations.
I have sold and installed all of the brands that you listed, and all have good equipment in their most efficiant products. The installation, warranty, efficiancy & price are the elements you would do well to focus on. Here is a site with some good shopping tips:
Consumer Reports will have the comparitive data that you are after, but it appears they want you to subscribe to their publication. Lots of free tips, but I'm afraid the good stuff will cost you a subscription:
Hope this helps. Good luck!
I can't address all of your issues, but I'll take on two. My primary claim to fame in the biz is air distribution. I never bought into the bogus claim that poor air balance is a given. This is all a function of proper duct design, and a pro will be able to achieve good air balance for you. This is easily determined by temperature and c.f.m. output at the diffuser. I had no problem guaranteeing balance (within reason) in the day.
The latest equipment achieves efficiancy through 2 primary means, variable speed blowers and compressors. Trane/Amercan Standard uses two compressors. In a four ton unit, the 2-ton runs 80% of the time, and the 4-ton kicks on in it's place during peak loads.( Your utility bills look more like a 2-ton home.) The variable speed blower wheel ramps up slowly, allowing humidity to be extracted and air to slowly even out temperature in the ducts, and then throttles up to high speed to achieve the temperature drop. It also ramps down slowly, to extract moisture from the coil so it stays in a drier condition. The old single-speed blowers are famous for slinging moisture from the evaporator coil right back into the duct system. Carrier/Bryant features a dual-speed compressor in the same housing, where there are two rotary pistons that kick in according to the load. The 4-ton unit will run with a single piston, and then the second piston kicks in for symeltaneaous operation to achieve a four ton capacity.
Carrier/Bryant has a proprietary thermostat, the Thermidistat, that allows you to set your desired relative humidity and temperature, and keeps it there through the manipulation of the blower and compressor.
With this technology, there is no longer any need to "undersize" a unit to achieve efficiancy or humidity results. The change in comfort is remarkable. A properly dehumidified 76 degrees feels more like 72 degrees in a standard system.
The reason I am an advocate of extended labor is my office was next to the service department. Trust me on this one. You will get hammered without it.
Given the level of specifications and performance you are looking for, I would recommend the assistance of a third party for your purchase.A friend in the biz, or a consultant, to review the contract and specs, help with the design, and inspect the installation. With the cost of a new system, and the impact on your utilities over the next 15-20 years, this expense, if any, will be well worth it.