Call Us Today!
Throughout summer, the most awful of things you can experience is the relentless blazing heat. The high temperature levels just will not decrease however instead appear to go up night and day. You lay awake at night aiming to determine where you can get an a/c service that deals with weekends, however the temperature levels are too high for you to concentrate. This short article goes over the importance of hiring professional Air Conditioner repair work professionals when your a/c system malfunctions.
Air Conditioner Setup:
The majority of people select expert air conditioning services when they want to install a brand-new Air Conditioning in their office or homes. Though Air Conditioner professionals primarily provide setup services this is not service that they provide. A couple of other services provided by such specialists in addition to Air Conditioning installation are repair work, replacement and AC upkeep services. Due to the fact that a/c units cost a substantial quantity of loan to acquire it is usually suggested that home owners with breakdown systems opt to fix rather than change their systems when they begin malfunctioning. Routine maintenance of home a/c units keeps them from malfunctioning typically and increases their resilience.
Air Conditioner Service:
One benefit of selecting an expert a/c expert is that such people, business or services companies provide their customer air conditioning upkeep services which are rather essential for the proper operating these devices. In order for an Air Conditioning to run both efficiently and effectively regular cleansing and upkeep or maintenance is needed. Cooling systems that are not correctly kept lose their durability and have a propensity to breakdown frequently which obviously causes extra financial burdens on homeowners due to the constant repair work they require. In order to prevent the monetary problem of needing to pay for Air Conditioning replacement services it generally advised by industry experts that you schedule your cooling system for maintenance every 8 months to 12 months.
Access to knowledge:
Another benefit of going with a professional when it concerns Air Conditioner repair is that of the knowledge they use. Most air condition systems set up in homes usually cost a considerable quantity of loan. As such when these crucial home devices malfunction it is necessary to get somebody who is knowledgeable and has the required proficiency need to make the essential repair works. Attempting to handle such a job individually as a DIY project might regrettably in more cases than not result in more harm than excellent; sometimes requiring an AC owner to spend a lot more in replacing the device instead of repairing it. By opting for expert AC repair work service you have the ability to limit the quantity of money invested in rectifying the breakdown because such experts are well positioned to recognize and correct the precise problem.
Basic Home Maintenance : How to Change an Air Conditioner Filter
Frequently Asked Questions:
I Live In Texas. What Size Air Condition Unit Do I Need For A Home That Is Approximately 1500 Square Feet?
Carolath got it right, but I would not go less than 3 ton unit, 36000 BTU, anything less, will run all the time on hot days. I think manufacture over rate the cooling capacity of some units. Shop around and get high EER rating it will save you money.
Where Is The Filter On My Air Conditioning Unit?
I'M Having Trouble Locating The Filter Area On My Unit- I Do Not Have A Manual And The Model Is Not Located On The Manufacturer'S Website.
The Model Is 58Gsc.
If Anyone Could Help That Would Be Great- I'M In California And It'S 88 Degrees In My House- At 1030 At Night!
Okay, To best help you is by telling you like this. cause you don't seem to know too much about air conditioning units. Without looking at your books. Lets use some common sense. OKAY. What does the filter do? The filter's job, is to filter the air before it enters the ac unit to keep the coils clean, and provide clean air. OKAY. BINGO! look at your ac unit. Figure out the intake of air register (air goes inside your unit) Then, look for the filter. If is a window unit you have. It is made out of plastic, pull the cover out, take the filter out and then washe it. If is an air conditioning unit that supplies air to the whole house. you need to go to the unit where you hear the motor blowing the air, and turn the power off to the unit, then open the panel and the filter should be right there!. On split systems you normally find the blower inside your attic. If is a stand up a/c unit inside of closet or not inside of closet it will be the behind the front panel. If you have a single package unit, meaning not a split system, then, you need to find the blower section, open the panel and should be there. EUREKA!. I FOUND IT! Good job you get a B-.
Need Help Identifying Ac Blower Motor Wires In Home Air Conditioning?
So, My Old Blower Motor Started Smoking, And Sparking, I Took It In, And Bought A New One, The Guy Also Sold Me A New Capacator With It, And Hooked It Up For Me... But I'M Confused Which Wires Go Where. I Took Pictures... Http://Picasaweb.Google.Com/Damien59/Edsairconditioner?Feat=Directlink
The Old Motor (Both Are 240V) Had 3 Wires Connected, 2 Going To The Capacator, And 1 Going To A Black Relay Box I Believe. The New Motor Has 2 Seperate Wires Just For The Capacator.. And Then Also A Black And White One.. (Not Using Blue Or Red Which Are Low And Med Speed)
Any Help Would Be Appreciated.
Is the orange wire on the capacitor in your picture attached to the top of the contactor? It is hard to tell.
If it is, then on the new motor, the 2 separate wires that go to the capacitor (probably both brown), go to the capacitor, the black wire on the new motor goes to the same place where the original black wire went on the relay, and the white wire goes to the terminal where that orange wire comes off of the contactor.
I hope this makes sense. A lot of older motors were 3 wire.
Why Do High Rise Buildings Need Air Conditioning?
Though fresh air is an important concern, perhaps the main concern is that heat rises. In a high rise the accumulated heat in the upper stories could become unbearable for those who have to live or work there.
Moisture Coming Out Of Window Air Conditioning Unit Vents?
We Have A Window Air Conditioning Unit In One Of Our Windows. It Is Mounted Tilting Downward, Which Is Supposed To Ensure That The Moisture Produced By The Cooling Process Flows Out The Back Of The Unit. However, Since We Got This Unit About A Year And A Half Ago (It'S Out Of Warranty), And It'S Doing It Again Now That We'Ve Turned It On For A Few Hours, The Moisture Just Pours Out Of The Vents.
When You Look Inside The Vents From The Inside, You See A Styrofoam Area With An Opening In The Middle Where You Can See The Fan In The Air Conditioning Unit. Looking At The Unit From The Back, From Outside, The Styrofoam Part Is Closed Off From The Working Parts Of The Air Conditioning Unit And The Back Grille.
When The Unit Is Operating, You Can Sit There And See An Enormous Amount Of Water Pool Up Inside The Grilles Around The Styrofoam Area, I Mean An Enormous Amount. It Doesn'T Appear To Have Any Outlet To Run Back To The Back Of The Unit, It Certainly Doesn'T Appear To Be Running Down Into The Opening To The Fan Area. It Just Pools Up And Blows Out The Vent Grilles.
We Have Tried Everything And It'S Impossible To Mount This Unit Tilted Any More Downward, But It Continues To Blow Water Out Of The Grille To Where We Have To Keep Towels On The Floor In Front Of It. I'Ve Even Thought Of Punching Holes In The Styrofoam To See If That Might Help The Water Stop Pooling Up In The Area Around The Vents.
Does Anyone Know What Might Be Going On Here, Or Have Any Suggestions For What We Might Could Do To Fix This. It'S A Great Air Conditioning Unit As Far As Cooling The Small Area We Use It For, But We'Re Getting Tired Of Having To Clean Up Water From It.
It sounds like a drain problem, although not the drain in the back as others have mentioned. (Also, I'm not sure how freezing up would make it expel that much water...)
There should be a place in the styrofoam where the water can drain to the back of the unit--this is most likely plugged. The easiest way to find and unplug the drain is to remove the cover from the unit (remove a few screws on the sides and top, and the whole outer case (sides and top) should lift off). Find the hole where the water is supposed to drain and unplug it, you shouldn't' have to drill another hole. While you have the cover off, clean it well and make sure none of the fins (front and back) are bent: if they are, you can straighten them with a fin comb (or if it's just a few, with a credit card).
Also check to make sure that a rear drain, if present, is not plugged. Many modern window air conditioners do not have a rear drain at all--the fan is low enough that once some water collects in the bottom, it will hit the fan and splatter on the condenser coils (cooling them, and evaporating).