Call Us Today!
Throughout summer season, the most dreadful of things you can experience is the ruthless blazing heat. The heats just won't go down but instead seem to go up night and day. You lay awake during the night trying to figure out where you can get an a/c service that works on weekends, but the temperature levels are expensive for you to focus. This article goes over the value of hiring professional Air Conditioning repair work professionals when your ac system breakdowns.
The majority of people go with professional air conditioning services when they want to install a new Air Conditioner in their houses or workplaces. Though Air Conditioner specialists primarily offer setup services this is not service that they use. A few other services provided by such service technicians in addition to Air Conditioner installation are repair work, replacement and Air Conditioner upkeep services. Since a/c systems cost a substantial quantity of loan to purchase it is generally suggested that property owner with malfunction systems decide to repair instead of change their units when they begin malfunctioning. Routine maintenance of house cooling systems keeps them from malfunctioning often and increases their durability.
One advantage of opting for an expert cooling professional is that such individuals, business or companies offer their customer a/c upkeep services which are quite essential for the correct operating these devices. In order for an Air Conditioning to run both efficiently and efficiently routine cleaning and upkeep or servicing is needed. Air conditioning systems that are not appropriately kept lose their toughness and have a tendency to breakdown on a regular basis which obviously results in additional monetary burdens on house owners due to the constant repair they require. In order to prevent the financial concern of needing to pay for Air Conditioner replacement services it generally recommended by industry experts that you arrange your cooling system for maintenance every 8 months to 12 months.
Access to competence:
Another advantage of choosing a professional when it comes to AC repair is that of the expertise they provide. Most air condition systems installed in homes normally cost a substantial quantity of money. As such when these essential house gadgets malfunction it is very important to get somebody who is experienced and has the necessary know-how have to make the necessary repairs. Attempting to handle such a task separately as a DIY task might regrettably in more cases than not cause more damage than great; often requiring an Air Conditioner owner to invest a lot more in replacing the device instead of repairing it. By selecting professional AC repair work service you have the ability to limit the amount of cash spent in correcting the malfunction because such specialists are well placed to determine and correct the accurate issue.
Air Conditioning Repair Service Griffin GA|770-467-6692|AC Repairs Spalding County Georgia
Frequently Asked Questions:
Who “Need” Air Conditioning?
A. Who “Need” Air Conditioning? Do People In Wealthy Nations Such As The United States “Need” Air Conditioning More Than People In Much Hotter But Also Much Poorer Nations, Such As Bangladesh Or Niger?
B. Construct A Ppc To Illustrate Your Answer Of Whether The People In Bangladesh Or Niger Need Air-Conditioning. Did Anyone “Need” Air Conditioning Before It Had Been Invented?
The states in the southern part of the U.S.
Without modern (electric powered) air conditioning, they would have continued to lose population to the northern states. As it was, with air conditioning, the southern states have seen their population grow by leaps and bounds.
6 of the 10 states with the highest growth rates are in the south and 9 of the 10 states with the lowest growth rate (including the two that are losing population) are in the north
Can you imagine Las Vegas without air conditioning?
Do You Know Anyone Who Uses A Geothermal Heat Pump For Their Home Heating And Air Conditioning?
Also Known As Geoexchange Heat Pump Or Ground Source Heat Pump.
How Much Did It Cost Them, And How Well Does It Work For Them? Do They Ever Have To Supplement It With Ordinary Heating Or Air Conditioning, Or Is It Always Plenty, Even In The Most Extreme Weather?
I had a geothermal unit (water to air heat pump)installed in October, 2007. I paid approx $8,000. There has not been any extreme weather here in North Carolina, but I don't have a supplement system (except for a fireplace (winter) and fan (summer).. This unit was a replacement for water to air heat pump installed when the home was built in 1977. So I have used water to air heat pump system for 30 years and am pleased with the results. You should take advantage of the tax credit incentive! My system is GT048HZN STandard low temp Florida Heat Pump, 19EER/ 4.5 c.o.p., 4.0 ton nominal which was connected to EXISTING ductwork and water supply.
Chillers In Air Conditioning?
I Have To Do A Project On Modern Air Conditioning. I Want To Know What Kind Of Air Conditioning Is Used In Most Modern Buildings These Days. I Heard They Use Water Cooled Chillers And Pump The Water Into The Building. If This Is True, Could Someone Please Explain How This Works Or Give Me Some Useful Links To Some Information. Thanks In Advance....
The process of removing heat from a building can be done several ways: 1) a water cooled chiller, 2) an air cooled chiller, 3) heat pump loop with cooling towers (heat rejection towers). The main difference between them all is where the heat is transfered. The first two systems use water to cool air that contains the heat of the space(rooms), with the main driving thermodynamic process occuring at the chiller. The heat pump system uses boxes that the refrigeration process occurs within the space, and uses a water loop to take the heat outside.
The thermodynamic process that allows heat to be transfered requires a fluid that has a low boiling point (ie converts from a liquid to a gas called a phase change). When the fluid goes through the phase change, energy is required to make the fluid/refrigerant convert it's state. That energy is called the "Latent Heat of Vaporization". All modern air conditioning works on this principle. As warm room air flows over a coil with the refrigerant (liquid state), the heat from the air is absorbed converting the refrigerant to a gas thus cooling the air. The refrigerant than needs to be "cooled" thus converting it back to a liquid. That is the purpose of the chillers and/or heat pumps. With chillers, all the heat of the building comes back to the central point via a water loop(the chiller) where the thermodynamic process occurs. With the heat pump, the thermodynamic process occurs at the point of heat generation (ie room).
With the water cooled chiller, heat is removed from the rooms of the building, then taken back to a chiller located within the building. There that heat is then transfered to another water loop (condenser loop) within the chiller device. The condenser water is than run up to a cooling tower located outside the building where the heat is rejected to the atmosphere.
An air cooled chiller is simpler than a water cooled chiller in that there is no cooling tower, and no condenser water loop. The heat is removed from the rooms of the building and taken directly to the chiller located up on the roof. From there, the thermodynamic process removes the heat from that water loop directly to atmosphere.
A heat pump system uses the thermodynamic process of refrigerant cooling directly within the room, transfering the heat to a common water loop that takes the heat out to a cooling tower on the roof.
Each system has it's benefits for many factors including first cost, efficiency(operating costs), and building space required. The water cooled system is the most expensive first cost, but the most efficient and therefore operationally cheapest to run. The heat pump system is the cheapest to install, but depending upon several factors can be cheaper to operate than the air cooled chiller. The air cooled chiller is typically installed in systems where low temperatures need to be achieved, and heat pumps can't to it, but system first costs can't be as high as the water cooled chiller.
Who, Where, When And Why Did They Invent The Air Condtioner?
An earlier form of air conditioning was invented in Persia (Iran) thousands of years ago in the form of wind shafts on the roof, which caught the wind and passed it through water and blew the cooled air into the building .
The 19th century British scientist and inventor, Michael Faraday discovered that compressing and liquefying a certain gas could chill air when the liquified ammonia was allowed to evaporate. His idea remained largely theoretical.
In 1842, Florida physician Dr. John Gorrie used compressor technology to create ice, which he would use to cool air blown over malaria and yellow fever patients.  He eventually had a vision of using his ice-making machine to regulate environment in buildings. He even envisioned centralized air conditioning that could cool entire cities.  Gorrie was granted a patent in 1851 (Patent #8080, USPTO) for his ice-making machine. The technology was attacked by Northern businessmen with the help of religious leaders they got to call the technology blasphemous, in order to protect its business of exporting natural ice to Southern states. When both his partner and he died in 1855, the idea of air conditioning died with him for the time being.
One of the first uses of air conditioning for personal comfort was in 1902 when the New York Stock Exchange's new building was equipped with a central cooling as well as heating system. Alfred Wolff, an engineer from Hoboken, New Jersey who is considered the forerunner in the quest to cool a working environment, helped design the new system, transferring this budding technology from textile mills to commercial buildings.
Later in 1902, the first modern, electrical air conditioning was invented by Willis Haviland Carrier (1876–1950). His invention differed from Wolff's in that it controlled not only temperature, but also humidity for improved manufacturing process control for a printing plant in Brooklyn, New York. This specifically helped to provide low heat and humidity for consistent paper dimensions and ink alignment. Later, Carrier's technology was applied to increase productivity in the workplace, and the Carrier Engineering Company, now called Carrier (a division of United Technologies Corporation), was formed in 1915 to meet the new demand. Later still, air conditioning use was expanded to improve comfort in homes and automobiles. Residential sales didn't take off until the 1950's. The Royal Victoria Hospital, Belfast, Northern Ireland, is a Landmark Building in building engineering services (built in 1906) and lays claim to being the first “Air conditioned Building in the World”.
In 1906, Stuart Cramer first used the term "air conditioning" as he explored ways to add moisture to the air in his southern textile mill. He combined moisture with ventilation to actually "condition" and change the air in the factories, controlling the humidity so necessary in textile plants.
The first air conditioners and refrigerators employed toxic gases like ammonia and methyl chloride, which resulted in fatal accidents when they leaked. Thomas Midgley, Jr. created the first chlorofluorocarbon gas, dubbed Freon in 1928. The refrigerant proved much safer for humans but is harmful to the atmosphere's ozone layer. "Freon" is a trade name of Dupont for any CFC, HCFC, or HFC refrigerant, the name of each including a number indicating molecular composition (R-11, R-12, R-22, R-134). The blend most used in direct-expansion comfort cooling is an HCFC known as R-22, and is slated to be phased out for use in new equipment by 2010 and completely discontinued by 2020. R-11 and R-12 are no longer manufactured in the US, the only source for purchase being the cleaned and purified gas recovered from other air conditioner systems. Several ozone-friendly refrigerants have been developed as alternatives, including R-410A, known by the brand name "Puron".
Please Pick my answer as Best Answer! All the best for your project!!
What Would Cause My Air Conditioner Coils To Freeze?
I Have A Nordyne Furnace E3eb-010H With The Indoor Coil And On The Side I Noticed That There Was A Frost Forming Over The Coper Coils On The Side. So I Cleaned The Air Filters And I Do That On A Regular Basis Anyway But Today I Noticed That The Coils Where Iced Over And The Coil Air Filters Where Iced To The Coil , So I Turned The Thermostat On The On Position To Thaw It Out. But It Is Still Frosting Over. I Called A Technician And Asked What He Thought And He Said It May Be Low On Freon, He Wants To Charge Me $55 Just To Come Look.The House Isnt Even 2 Years Old So Is That Normal To Be Low On Freon That Soon? I Am Pretty Good About Fixing Things So If Anyone Has Any Advice I Would Greatly Appreciate It. Thank You =)
If your using a washable type filter. I suspect that the evaporator coil itself maybe plugged up.
The washable filters are the worst filter you can use. They allow too many particulates to pass though and in turn plug up the evaporator coil. Which restricts air flow and hence you have the condition your in.
Always use a pleated filter and change every 30 days.
The conditions that cause the problem that you may have (in no order)
Air Flow problem
- Dirty Filter
- Pluged evaporator coil
-Blower not working
Failed TXV valve (meters refrigerant)
With the system only being 2 years old if any parts have failed, then the part itself would be under warranty NOT the labor. You have to pay labor.
So, I would recommend leaving the system OFF untill you can have someone come out and trouble shoot the problem.